Sony PVM A170 17” OLED Monitor
We are excited to now offer for hire the most beautiful and deluxe 17" Monitor we had ever seen! We couldn't take our eyes off it when we first saw it on display at a trade show, so we got one in for our very own to share with you. The most spectacular image quality you could ever imagine... the Sony PVM-A170 17" OLED Director's Monitor. Supplied fitted in a Lemsford operational case. Get ready to take your video village to the next level!
Audio Monitor Output: Stereo mini jack (x1)
Speaker (Built-in) Output: 1.0 W (mono)
Headphone Output: Stereo mini jack (x1)
Power Requirements: AC 100 V to 240 V, 0.9 A to 0.5 A, 50/60 Hz DC 12 V to 16 V, 6.4 A to 4.8 A
Power Consumption: Approx. 75 W (AC power supply) (max.)
Approx. 60 W (AC power supply) (average power consumption in the default status)
Operating Temperature: 0C to 35C (32F to 95F)
Recommended: 20C to 30C (68F to 86F)
Operating Humidity: 30% to 85% (no condensation)
Storage / Transport Temperature: -20C to +60C (-4F to +140F)
Storage / Transport Humidity: 0% to 90%
Operating / Storage / Transport Pressure: 700 hPa to 1060 hPa
Dimensions: (W x H x D) 435.0 x 274.0 x 65.5 mm* (17 1/4 x 10 7/8 x 2 5/8 inches) (without monitor feet)
435.0 x 296.5 x 165.0 mm (17 1/4 x 11 3/4 x 6 1/2 inches) (with monitor feet)
MassApprox.: 4.2 kg (9 lb 4.2 oz)
Supplied Accessories: AC power cord (1),
AC plug holder (1),
Handle (1) (including 4 screws),
CD-ROM (1)
MB-P17 Mounting bracket
TECHNICAL SPECIFICATIONS:
Panel: OLED panel
Picture Size (Diagonal): 419.7 mm (16 1/2 inches)
Effective Picture Size: (H x V) 365.8 x 205.7 mm (14 1/2 x 8 1/8 inches)
Resolution: (H x V) 1920 x 1080 pixels (Full HD)
Aspect1: 6:9
Panel Drive: RGB 10-bit
Viewing Angle: (Panel Specification) 89/89/89/89 (typical) (up/down/left/right contrast > 10:1)
Composite Input: BNC (x1), 1.0 Vp-p 3dB sync negative
SDI Input: BNC (x2)
HDMI Input: HDMI (x1) (HDCP correspondence)
Audio Input: Stereo mini jack (x1), -5 dBu 47 k or higher
Parallel Remote: RJ-45 modular connector 8-pin (x1) (Pin-assignable)
Serial Remote: (LAN) RJ-45 modular connector (x1) (Ethernet, 10BASE-T/100BASE-TX)
DC Input: XLR-type 4-pin (male) (x1) DC 12 V to 16 V (output impedance 0.05 or less)
Composite Output: BNC (x1), Loop-through, with 75 automatic termination
SDI Output: BNC (x2)
Output signal amplitude: 800 mVp-p 10%
Output impedance: 75 unbalanced